|CBF-Explosion-proof Axial Fan Series|
Explosion-proof axial flow fan: CBF-300 CBF-400 CBF-500 CBF-600 CBF-700 CBF-750 series
It is suitable for conveying flammable, explosive and non-corrosive gas. The ambient temperature should not exceed 60 ℃. It is widely used in general factories, warehouses, offices, and houses for ventilation or strong heating. Installed in series to increase the pressure in the pipeline, removing the motor can be used as a free fan. ，采用防腐材料外涂环氧漆加工而成，电机采用特种防腐电机用于输送有腐蚀性气体。 Anti-corrosion axial flow fan (FT35-11 type) , which is made of epoxy paint with anti-corrosive material, and the motor adopts special anti-corrosion motor to transport corrosive gas. （ BT35-11型 ），用于输送易燃易爆的气体。 Explosion-proof axial flow fan ( BT35-11 ), used to transport flammable and explosive gases. It is suitable for the temperature group T1 ～ T4. The impeller is made of aluminum alloy to prevent sparks during operation. The motor is an explosion-proof motor. The performance parameters and dimensions of FT35-11 and BT35-11 fans are the same as T35-11 fans. The fan needs to have bracket feet and motor voltage. Please specify when ordering.
安装说明 Installation instructions for BT35-11 series explosion-proof axial fan
1. Check the fan for damage and deformation before installation. If there is any damage and deformation, do not install it until it is repaired properly.
2. When installing, pay attention to check whether the connecting parts are loose, and the gap between the blade and the wind cylinder should be even, and they should not collide.
3. The weight of the duct connected to the tuyere should not be borne by the fan of the fan, and additional support should be added during installation.
4. A wind collector must be installed at the fan outlet and hope to install a protective net.
5. The fan base must be naturally engaged with the ground plane. Do not tap the base to force the connection to prevent deformation of the base. During installation, the base should be corrected, iron pads should be maintained, and the horizontal position should be maintained. Then the foundation bolts should be tightened.
6. After the installation is completed, the experiment must be performed first, and the official use is allowed after the operation is normal.
Explosion-proof mark: Eed II BT4
Protection level: IP54
Anticorrosion grade: WF1
Rated voltage: AC220 / 380
Spindle speed: 1450r / min
Performance table of BT35-11 explosion-proof flame-retardant axial flow fan
Copyright © 2018 Yueqing Sannuo Explosion-proof Electric Co., Ltd. All Right Reserved.
Address: Dongyan Industrial Zone, Wengyang Street, Yueqing City, Zhejiang Province Website: 33pp145.cn
Technical Support: Youdou SoftwareZhejiang Public Network Security Preparation No. 33038202003255